Certified Hygienic Bearing Houses
Our bearing houses are certified by EHEDG, 3-A and USDA standards. At the same time, our bearing houses are IP69K-certified. The product group consists of five different types of bearing houses fitted with ceramic or standard stainless steel bearings. The bearing houses are designed according to ISO3228_2013 and fit insert bearings that meet ISO9628_2006. This also applies to outside dimensions and it is therefore a perfect hygienic substitution for an unhygienic solution.
In choosing bearing houses from NGI optimized with ceramic spherical ball bearings, you will be able to reach optimal quality, robustness and stability. The bearing houses are lubrication free which minimizes maintenance and the need for grease, thereby, minimizing the risk of contaminating the product.
Read more about certified hygienic bearing houses
2-hole flange bearing house
Special features
- Type XB2FC
- Mounted parallel to shaft direction
- Shaft diameter 20 mm - 40 mm
- Can be supplied with M10 certified hygienic nuts and bolts for maximum hygienic safety
3-hole flange bearing house
Special features
- Type XB3FC
- Mounted parallel to shaft direction
- Shaft diameter 20 mm - 30 mm
- Can be supplied with M10 certified hygienic nuts and bolts for maximum hygienic safety
Pillow block bearing house
Special features
-
Type XBPBC
-
Mounted perpendicularly to shaft direction
-
Shaft diameter 25 mm - 30 mm
- Can be supplied with M10 certified hygienic nuts and bolts for maximum hygienic safety
Tapped base bearing house
Special features
- Type XBTBC
- Mounted perpendicularly to shaft direction
- Shaft diameter 25 mm - 30 mm
- Can be supplied with M10 certified hygienic nuts and bolts for maximum hygienic safety
Anti-static solution - XB series
Speciel features
- Type XB series
- Stainless steel springs ensure connection between bearing and steel bushing
- Electro-static discharge ESD dissipative
- All our existing models are available as an anti-static model
Let us help you find
the right bearing house
NGI is the only manufacturer in the world of certified hygienic bearing houses designed in accordance with EHEDG, 3-A and USDA standards. The bearing houses can be fitted with ceramic or as standard stainless steel bearings.
There are a large number of product combinations available in regards to e.g. cover combination, color combination and accessories.
Make a request to be contacted by your local NGI sales representative to learn more about your possibilities.
The only 3-A, EHEDG, USDA and IP69K Certified Bearing House in the world!
Our new hygienically designed bearing houses are the only bearing houses in the world which are certified by EHEDG, USDA, and 3-A. At the same time our bearing houses are IP69K-certified. The bearing is protected by a, patented, waterproof sealing that blocks out dirt and bacteria. The bearing house can be equipped with a stainless steel or ceramic bearing. Both are lubricated for life eliminating the risk of spreading contaminated grease during high-pressure cleaning.
- Cleaning and maintenance
- Guidance
- 3-A certificate
- EHEDG certificate
- USDA Equipment certificate
- Declaration of conformity
(Declarations always adhere to the latest RoHS and REACH) - Leaflet Bearing houses
- See accessories
Product group features
• Easy access for cleaning from all angles
• Flexible mounting - can accommodate initial misalignment
• Can be supplied with hygienic bolts and nuts as standard. More sizes available upon request.
• Can accommodate temperatures -35ºC to +110°C depending on insert bearing
• Unique patented seal system, waterproof at more than 3° misalignment
• Produced in sturdy grilamid with co-moulded FDA-approved TPU seals
• Fitted with stainless steel bearing or ceramic bearing.
• Tested and conforms to ISO9628_2006 & ISO3228_2013
• The housing is able to withstand the same dynamic and static radial load as insert bearings
• Suitable for heavier or alternating axial load depending on the way it is locked onto the shaft
• For further information on load capacities look at bearing data sheet or contact NGI
Anti-static solution - XB series
Static electricity is created by moving, sliding, or rotating parts.
This is typically generated through motors, belts, stirring guides sliding against belts, sprockets and rollers. The choice of materials and design is crucial to how big a problem static electricity is on a machine or on any equipment in a production.
NGI has therefore developed a solution for those of our customers who use our hygienic composite bearing housing, but also need to discharge electricity through shaft, bearing, housing and frame.
Learn more about the solution by downloading our leaflet here and contact one of our sales representatives if you wish to receive a free sample of our patent pending XB series for you to test in your production!
